- Innovations in material science have led to the development of advanced gasket materials, enhancing their durability and sealing capabilities. These advancements, coupled with precision manufacturing techniques, have significantly reduced the likelihood of gasket failure, contributing to the overall reliability of modern engines.
There is a British Standard laid down for the control of synthetic rubbers. BS 3574 (1989) helps to determine shelf life – for instance, Nitrile (NBR) and Polyacrylic (ACM) are Group ‘B’ rubbers and have a 7-year life, whilst Silicone (VMQ) and Fluoroelastomers (Viton®) are Group ‘C’ rubbers and have a 10-year shelf life. PTFE and Leather do not come into this category but like the others should be kept in the original packing for as long as possible away from direct light, dust, and humidity. Ozone, which can also be produced by battery-driven forklift trucks has a very bad effect on synthetic rubbers. Finally, protect the sealing lip – DO NOT hang the seals on nails, wire etc.
Most oil seals consist of some basic elements that configure their structure, such as the sealing element, the metal case, and the spring:
The allowable total eccentricity is the maximum total eccentricity at which the sealing edge can accommodate shaft rotation and retain adequate sealing performance. The oil seal's allowable total eccentricity is affected by the design of the oil seal, the accuracy of the shaft, and the operating conditions.
Hopefully after reading this article, you have a better understanding of why choosing the right materials for oil seals is so important. Remember, if you have any questions about industrial oil seals and supplies, please contact us and we would be more than happy to help.
Wear and oil loss remains two of the most frequent signs of engine seal failure and, if not paid attention to, it can give rise to a breakdown in the vehicle’s system. Regular maintenance and routine oil changes minimize the issues associated with oil seals and potential oil loss.
Usually, these oil seals are used to seal lubricating oil or grease and contain it within the application, so that moving parts such as bearings are continually supplied with enough lubrication. However, such seals are also used for sealing other liquids, gases, and solids, such as powders or granules.
Storage and Handling
What are Oil Seals? 6 Things DIYers Should Know
1 .Material: There are 7 types of material used for oil seals, they are.
④