Different from the general zinc barbed rope, high zinc barbed rope surface zinc content is very high can reach the former 6-8 times, so in the service life also has a great advantage, ordinary products three or five years began to corrosion and the latter will take longer to change. Stainless steel barbed rope is in the material aspect of protection, so the durability is also better, these two products are long in the service life, but in the price is high.
After the optimization of the process, mass production of 0.80mm electro galvanized steel wire electro galvanized zinc layer quality is controlled within 80 ~ 90g/m2, zinc layer quality dispersion is very small; The results show that the average weight of zinc layer is 14.5g/m2, the loss of zinc layer is less than 5%, and the tensile strength of steel wire is 2300 ~ 2500MPa. It not only effectively controls the quality of zinc layer of raw steel wire, but also reduces unnecessary waste and production cost.
The production process of stainless steel blade and galvanized blade is basically similar. The blade size is usually determined according to the mold.
Moderate rates of foam formation may be harmless. The small homogeneous particles with large denier in the tank can stabilize the foam layer, but the accumulation of too many solid particles will cause explosion. Using activated carbon mat to remove the surface active substances, or through the filtration of foam is not very stable, this is an effective measure; Other measures should also be taken to minimize the introduction of surfactant.
Some customers may not use the blade rope immediately when they buy it. Some are for retail and some are temporarily without the blade rope for site construction. At this time, customers need to follow up the characteristics of the blade rope for storage.
- 5.Specifications: BTO-10, BTO-12, BTO-18, BTO-22, BTO-28, BTO-30, CBT-60, CBT-65
With the improvement of people’s living standard, pet raising is becoming more and more common. Pets also need a comfortable environment, so pet cage is an ideal choice for pet raising. Dogs are loyal friends of human beings. They will accompany you all your life and protect you until you die. Raising small animals can bring comfort to lonely old people; Patients who receive visits from animals can improve their depressed moods and even relieve pain. Families with pets add joy and cohesion; Companion animals usually form familial bonds with their owners.
Small and medium-sized cat cages, dog cages and fences are mostly made of pure iron wire, wire diameter is generally between 2-5mm. Of course, the larger the cage, the thicker the wire, because the larger cage needs to withstand more force.
Cold galvanized, generally speaking, do not need heating, galvanized amount is little, this galvanized parts are easy to fall off in wet environment. Hot dip galvanizing, also known as hot dip galvanizing, is to melt the zinc ingot at high temperature, put some auxiliary materials in, and then dip the metal structural parts into the galvanized groove, so that the metal members are attached to a layer of zinc layer. The advantage of hot dip galvanized is that its anticorrosion ability is strong, the adhesion and hardness of galvanized layer is better.
- The higher the carbon content of steel wire, the worse its plasticity, the smaller the section compression and elongation of steel wire, steel wire in rolling deformation is difficult, the width of the smaller. For alloy steel wire, because the alloy element dissolved in solid solution can improve the cold working hardening rate of steel wire, its deformation resistance is large, the rolling width is small, and it is easy to crack.
- The principle of wire mesh mesh size, wire, square meters of steel content, galvanized amount, etc., to consider the corrosion resistance of wire mesh and the safety of the system! Wire mesh galvanized than wire diameter more fierce, galvanized quantity is very important, must be hot plating, welding after plating than plating after welding, as for wire diameter, induction and consideration of site construction and meet the needs of Ann.
There are various specifications of barbed rope, which can be divided into two categories: ordinary barbed rope and blade barbed rope.
The production process of large coil galvanized wire is relatively simple. The wire after cleaning is put into electroplating solution first. Of course, the plating solution should contain zinc oxide, a direct current of steel, another zinc plate in the plating solution. The zinc is transferred to the surface of the steel as a molecule. If it shows a bright and beautiful color, the wire is coated with zinc.
The quality of hot-dip galvanized barbed wire is only the zinc layer attached to the surface of the wire, and with the chemical reaction, the zinc layer on the surface will gradually lose its role because of the oxidation reaction, which is more prominent in the humid environment. And because the use of rusty wire after all, it is said that the quality of hot-dip galvanized barbed wire is certainly not up to the level of stainless steel barbed wire.
Any application environment, users want a better the strength of the welded wire mesh, only need to improve its intensity, will make better the habit of using demand, but to be improved in the strength of this product, also need yo have a variety of conditions, will need to see factory in produce what kind of material, the strength of the product also is the material strength, But a manufacturer in the data does not fit the strength requirements, after all, there is no way to make the strength of the product progress, so this is the condition to.
- Galvanized iron wire is divided into hot galvanized wire and cold galvanized wire, using low carbon steel wire processing, after drawing molding, pickling rust removal, high temperature annealing, hot galvanized, cooling and other processes. It has good toughness and elasticity, and the amount of zinc can reach 300 grams/square meter. It has the characteristics of thick galvanized layer and strong corrosion resistance. Galvanized iron wire can be cut off in the construction of the tie wire, the length of 20cm, 30cm and 40cm, can be cut off according to requirements.
We contrast the difference between galvanized electric welding mesh and other electric welding mesh by introducing in detail, and the following describes its material: Galvanized welded wire mesh is made of low carbon wire, through automation of fine precision machinery equipment spot welding processing after forming, selection of disposal of the appearance of zinc leaching technology, produce practice British standard, with smooth surface neat, uniform layout to consolidate, the function is good, even if some sections or accept pressure also won’t attack lax appearances, it is the strongest anti-corrosion function in iron mesh, Screen mesh is iron use one of the most widely network class, excellent anticorrosive makes its popularity in the breeding, sucking the neat surface, increased the look and feel, can play will be decorating effect, this feature makes it reflected in the mining industry, because the select material of low carbon high quality material, make it unique iron mesh not usually have flexibility, Concluded that it in the use of plasticity in the process, and then can be used for hardware technology in the deep processing and production, disorderly wall batch swing, underground leakage prevention crack, light mesh body, so that the cost is much lower than the cost of iron screen, more able to understand its economic and practical. Galvanized electric welding net can be used as poultry cage, egg basket, channel fence, drain sink, porch fence, rat net, mechanical shield, livestock and plant fence, grid frame, etc. It is also widely used in industry, agriculture, construction, transport, mining and other occupations.
River isolation network because of different regions are not close to the same, some places called river guardrail network, reservoir isolation network and called river bridge guardrail and so on, but they refer to the same kind of product, we all know that the river isolation network fence itself is a kind of obstacle, to prevent people and cars falling into the river, if installed river isolation network will not appear such a problem, Its setting is conditional, generally in the river fence set guardrail and more people and vehicles installed guardrail maintenance, the relative risk of discrimination. As long as the correct planning, guardrail to play its own function and advantages. Today, I will introduce to you the style of the river isolation network.
What’s the difference between cold galvanized wire and hot galvanized wire? It is mainly different production process. Cold galvanized iron wire, also known as electric galvanized iron wire, is the use of electrolytic galvanizing process, and hot galvanized iron wire is the use of hot penetration galvanizing process. Compared with the two, hot dip galvanized iron wire thick coating, high zinc content, has stronger anti-corrosion and anti-rust effect. Similarly, the price is also higher, cold galvanized iron wire and hot galvanized iron wire which good? Mainly for the use of scenarios and requirements to choose appropriate galvanized iron wire, appropriate is better.
Post time: 25-05-23- Carbon steel wire is basically do not participate in alloying elements of high carbon steel wire, but also in the low cost of steel wire, hot and cold processing is outstanding, the use of a wide range of steel. Spring steel wire contains high carbon steel wire, high carbon steel wire is the spring steel wire in between.
Post time: 24-02-23- All can do spring can be called spring steel wire, and high carbon is the highest carbon content. Features: WITH high strength and hardness, high elastic limit and fatigue limit (especially notched fatigue limit), cutting function is OK, but welding function and cold plastic deformation ability is poor.
- Smelting technology is good, advanced equipment, advanced process of large stainless steel plant whether in the control of alloy elements, impurities removal, billet cooling temperature control can be guaranteed, so the product quality is stable and reliable, good internal quality, not easy to rust. On the contrary, some small steel equipment is backward, backward process, smelting process, impurities can not be removed, the production of products will inevitably rust.
1. Electroplating process control
In order to remove defects such as surface film layer and surface inclusion of large roll galvanized wire, it can be treated by conventional technology. The presence of small homogeneous particles of large denier in the tank can stabilize the foam layer, but the accumulation of too many solid particles can cause explosion. Activated carbon mat to remove surface active substances, or through filtration to make the foam less stable, these are effective measures; Other measures should also be taken to minimize the intake of surface active substances. The electroplating speed can be significantly reduced by the introduction of organic matter.
- 4. Rinse the foam off your cat thoroughly.
Galvanized iron wire has good anti-corrosion and anti-rust ability, so it can be prevented from being used in some outdoor guardrail or fence, especially on handicrafts, handicrafts are also of great use, galvanized iron wire, the surface is not easy to rust and oxidation. Now many hardware manufacturers produce iron wire, and iron wire is very easy to rust, if you need to use in outdoor or humid places, generally customers will require the use of galvanized iron wire equipment to give the wire a layer of zinc, the thickness can be determined according to user requirements.
Steel mesh manual binding line of the joint simple sliding, steel and concrete strength is weak, simple crack. The welded joint can accept not only pressure but also shear force. Longitudinal and transverse steel bars form a network structure, which plays a bonding anchorage effect. The number of solder joints per unit area is added when the diameter of the wire mesh is small and closely spaced. More conducive to strengthening the crack resistance of concrete, can reduce more than 75 percent of the attack of steel mesh cracks is a new, energy-efficient steel mesh structure, used in beams and columns, floors, roofs, walls, concrete pavement, bridge deck paving and other industrial and civil buildings.
- The top of the wall is installed with ordinary galvanized barbed rope for protection. Although the effect is better, the style is not beautiful. In recent years, it has been gradually replaced by blade barbed rope. First of all, the protection ability itself does not have any point of emphasis, can not use its own climbing at the same time, due to the relatively large volume of the intention to turn over the personnel caused no small difficulty, the whole body has a spike is very easy to be scratched or hook clothes, so in this aspect of the protection ability is better. Moreover, the style of spiral cross is more beautiful than the original single style, which is more suitable for some high-grade apartments and other external walls of the fence, at the same time, it will not cause the feeling of imprisonment in the interior.
- Slowly through the axial flow fan or exhaust hole directly discharged to the sand blasting room, so that the power of dust discharge is low. And in the discharge of dust because there is no further treatment, so the discharge of dust will seriously pollute the sandblasting room and the surrounding environment, the health of the site staff will also harm.
Defects such as surface film and surface inclusions can be found and treated by conventional techniques in order to remove them locally from the surface of the deposition layer. Excess foam is formed when soap and surfactants such as saponified fats are brought into the tank.
Now many industrial products will be made of stainless steel wire rope material. In order to identify the fake and inferior stainless steel, certain measures and methods can be taken. But many customers do not know what way to identify, listed the following identification methods for you.
Post time: 23-02-23