Lift out the rags without dropping dirt into the engine, bores or passages.

We have different types of oil seals that are designed specifically for various industries, like aerospace, automotive, oil & gas, electronics, chemical analysis, food & beverage, engineering, and so on. Some of our other custom products are bellows, insulators, labware, bushings, ball valve seats, tubes, rods, films, and sheets. Contact us today to make sure you choose the best component for your application.

Contact

There are a wide range of oil seals to select from for any number of uses, so this guide will break down the most common seals to help you choose the right one for whatever piece of machinery you are working on.

Oil seals require sufficient time to solidify and cure. Premature use of equipment with newly installed oil seals can compromise the integrity of the oil seal and may damage your machine. Refer to the supplied instructions for the time frame allocated for the seal to cure.

Construction of an Oil Seal

Also, Viton has the widest range of resistance to chemicals. It’s resistant to several chemicals like silicone oil & grease, mineral & vegetable oil, aliphatic, chlorinated hydrocarbons, methanol fuels, and so many more.

(4) The degree of eccentricity on the installation If the eccentricity of the oil seal and the shaft is too large, the sealing performance will be deteriorated, especially when the shaft speed is high. If the eccentricity is too large, a W-shaped oil seal can be used.

Although extremely flexible, silicone does have some disadvantages. Many silicone compounds have poor tensile strength, tear resistance, and abrasion resistance. If you are looking for a material that offers a higher tensile strength, while still offering high temperature resistance, look no further than Viton®.

Material Code ISO 1629

The hydrodynamic ribsa) have a two-stepped rib configuration provided in one direction on the air face of the lip. Even if the first rib is worn out, the second rib comes into contact with the shaft surface, meaning that this type of oil seal ensures higher sealing performance. Seal with Side Lip A large side lip ensures prevention of entry of dust/water.

Standard 3760/3761

MAKING THE CHOICE OF AN OIL SEAL VS. MECHANICAL SEAL

OIL SEAL

ISO 6194-1 1)

Oil seals are typically classified based on their sealing capabilities, with common types including lip seals, mechanical seals, and hydraulic seals. Lip seals are the most basic type, consisting of a flexible lip that seals against the shaft. Mechanical seals use sliding or rotating components to create a seal, while hydraulic seals are designed for high-pressure applications.