Dr Peter  Dingle (BEd, BSc, PhD)

After oral ingestion, the absorption of titanium dioxide particles is low, however they can accumulate in the body, Maged Younes, chair of the European Food Safety Authority's expert Panel on Food Additives and Flavourings, said in a May 2021 statement.

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

Moreover, the gravimetric method's inherent accuracy makes it a preferred choice for regulatory compliance. Many manufacturing processes are subject to stringent quality regulations, and having reliable methods for determining material composition is fundamental to meeting these standards. Accurate gravimetric analysis assists manufacturers in minimizing waste, optimizing formulations, and ensuring that end products are both effective and safe.

2.Inorganic white pigment. Widely used as a white pigment for plastics, paints and inks such as polyolefins, vinyl resins, ABS resins, polystyrene, polycarbonate, nylon and polyoxymethylene.

What titanium dioxide is really emblematic of ... is the failure of FDA to look back at these old decisions and ask whether its decisions that were made in this case ... 56 years ago (in the 1966 approval) still hold up, he said.

Most commonly used in candy, it can also be found in salad dressings, chewing gum, ice cream, frozen pizzas, drink and jello mixes and many other food categories. Titanium dioxide creates a smooth finish and adds shine and brightness to other colors. 

Toxic effects of TiO₂ NPs on aquatic organisms

Titanium dioxide is one of the many oxides formed naturally in our environment. Manufacturers source this mined mineral from rutile, brookite, and anatase. It is then processed and refined to meet stringent safety guidelines based on the end-use for the mineral. 

Fig. 8. Selected images of skin stratus treated with P25TiO₂NPs 10% (left) and VitaminB2@P25TiO₂NPs 10% (right) under light, showing no penetration of the nanoparticles (white arrows) beyond the outer stratum corneum.

Health Canada's Food Directorate recently completed a “state of the science” report on titanium dioxide (TiO₂) as a food additive. Food-grade TiO₂ is a white powder made up of small particles that has been permitted in Canada and internationally for many years as a food additive to whiten or brighten foods. Food-grade TiO₂ has long been considered safe in Canada and in other countries when eaten as part of the diet.

Breathing problems in offspring

Titanium dioxide (TiO2) is a versatile compound widely utilized in various industries, particularly in the production of paints, coatings, plastics, and paper. The accurate determination of titanium dioxide content is essential for quality control purposes in these manufacturing processes. Among the various methods available for quantifying TiO2, gravimetric analysis stands out due to its reliability and accuracy. This article explores the gravimetric determination of titanium dioxide, its significance in factory settings, and the technical processes involved.