Polyacrylate oil seals are a perfect compromise between quality and cost. They perform well with high temperatures and chemicals, but not as well as Viton oil seals. Polyacrylate has a temperature range of -25 degrees Fahrenheit to 300 degrees Fahrenheit. Due to their outstanding resistance to hot oil and oxidation, they are commonly used in automobile transmissions and hoses; however, they are also used for shaft seals, gaskets, and o-rings.
Rotary Wheel Of Auto Parts
When the engine is running, the ignition coil receives a signal from the engine control unit to fire at the correct time. The coil then rapidly builds up a magnetic field within the primary winding when the signal is received, and when the signal is cut off, the magnetic field collapses rapidly, inducing a high voltage in the secondary winding. This high voltage is then sent to the spark plug, where it jumps the electrode gap, igniting the air-fuel mixture in the combustion chamber.
(JIS* SUS304)
Having problems installing oil seals? The part has had many updates in recent years, which has totally changed the installation process. In this blog, our specialists will give you information and installation tips so that these oil seals no longer cause difficulties during your overhaul or repair job.


Case study 1: Volkswagen
The basic principle of sealing is straightforward – the flexible lip is held against the rotating part (usually the shaft) whilst the casing (or O.D.) is pressed into the housing or bore and holds the seal in place. The sealing lip needs some form of lubrication to avoid overheating and is usually energized by means of a garter spring.
spring loaded
As the pressure increases, the radial load and the friction of the sealing lip increase in contact with the shaft. As with temperature, each oil seal has a recommended pressure for optimum performance. Excessive pressure causes the seals to wear more quickly and consequently have a shorter life.